LCX high viscosity Roots pump

The LCX high viscosity Roots pump consists of a pump body, pump cover, shaft, gear, rotor, packing, gland and other components. The LCX high viscosity Roots pump can rotate in reverse, with a skeleton oil resistant seal at both ends of the shaft and an oil return device in the middle to prevent air intake or oil leakage.

The working principle of LCX high viscosity Roots pump is similar to that of Roots blower. Due to the continuous rotation of the rotor, the extracted gas is drawn into the space v0 between the rotor and the pump casing through the intake port, and then discharged through the exhaust port. Due to the fully enclosed state of the v0 space after inhalation, there is no compression or expansion of gas in the pump chamber.

The LCX high viscosity Roots pump produced by Haihong Pump Valve is available in two forms: belt drive and gear reducer drive. This pump has the characteristics of low speed, high efficiency, small size, large flow rate, low power consumption, strong self-priming ability, no need for oil injection, and easy use. LCX high viscosity Roots pump is modified based on LC type pump to solve the transportation of asphalt and condensate oil. It adds insulation layer on the outer surface or end cover of the pump casing, and uses steam or thermal oil circulation to insulate the working chamber of the pump, providing convenient and good conditions for continuous and intermittent operation of the pump. It can be widely used for transporting petroleum and petroleum products (gasoline replaceable copper pump blades) and for transporting various oils and liquids in factories. Such as crude oil, paint, lubricants, glass glue, fatty acids, toothpaste, and light alkaline (soap processing) liquids; Food processing can transport various liquids, such as soybean milk, yeast, syrup, etc.

Introduction to the advantages of LCX high viscosity Roots pump:
A high viscosity pump mainly consists of inner and outer rotors, shafts, pump bodies, pump covers, brackets, seals, bearings, etc. 2. Smooth liquid transportation, no pulsation, low vibration, and low noise. The speed and flow rate of a high viscosity pump are linearly related, and the pump flow rate can be adjusted by changing the speed appropriately. High viscosity pumps are particularly suitable for transporting high viscosity media. The high viscosity pump shaft end adopts mechanical seal. 4. Limit the prevention of leakage. 5. Suitable for outdoor devices, the fully enclosed magnetic coupling chamber can maintain the external magnet from coming into contact with moisture or external substances. 6 types of standard sliding bearing materials are available for selection: cast iron, copper graphite, tungsten carbide. The material of the standard magnet is neodymium iron boron alloy. The selectable samarium cobalt magnet allows an operating temperature of 250 degrees Celsius.